In March 2019 I already made an external keyboard for the IC-7300 in an aluminum enclosure. You can read that story here: Icom IC-7300 External Keyboard.
This time I wanted to build a keyboard that could be put together with as few tools as possible, and with easy to find parts. It is also the intention to put the PCB on feet and not to install it in a housing. This way everyone can appreciate the beauty of the PCB at any time. 😉
I developed the PCB with the free version of Eagle and use the services of JLCPCB to manufacture the PCBs. The first impressions in the gerber viewer already look promising. I cannot wait to see them in the physical form.
Stereo Sockets PJ-324M: https://s.click.aliexpress.com/e/_9jJH8H
Omron  B3F-4055: https://s.click.aliexpress.com/e/_AlrrYH
Omron B3F-4055 with cap: https://s.click.aliexpress.com/e/_9inuFr
Spring Terminal Connector: https://s.click.aliexpress.com/e/_9hexBL
1 x 470 Ohm resistor
2 x 1.5K Ohm resistor
1 x 2.2K Ohm resistor
1 x 4.7K Ohm resistor
Resistor sets although you need to buy them per 200:
https://s.click.aliexpress.com/e/_AXQCE9
GX16 – 8 pin -Male and Female: https://s.click.aliexpress.com/e/_AdJHIv
Porting the Autmatic Magnetic Loop Tuner project to the Teensy 4.0 platform Building a Nano…
In de kringloopwinkel een spiksplinternieuwe Opinel 9 vinden, met het originele antidiefstal stripje er nog…
Now that the two toroids are prepared, and everything is already mounted into the enclosure…
The project descibes to use a FT37-43 toroid. This toroid is manufactured by Amidon. I'm…
Green wire, 5 turns Start with the green wire. In the parts list it is…
The original design features the Radio-Shack P/N 270-233 box, wich measures 5" 1/16 x 2"…