Porting the Autmatic Magnetic Loop Tuner project to the Teensy 4.0 platform Building a Nano CW keyer https://github.com/k3ng/k3ng_cw_keyer/tree/master Describing and…
Now that the two toroids are prepared, and everything is already mounted into the enclosure lid, we can start soldering…
The project descibes to use a FT37-43 toroid. This toroid is manufactured by Amidon. I'm using a similar toroid made…
Green wire, 5 turns Start with the green wire. In the parts list it is stated this wire should be…
The original design features the Radio-Shack P/N 270-233 box, wich measures 5" 1/16 x 2" 5/8 x 1" 5/8. I…
The capacitors that are used in this ATU are CMB-443BF's. You can find them on AliExpress. These capacitors are used…
I released the project files of the Icom External Keypad V1.21. You can find them on the Icom External Keypad…
On the Belgian Facebook group "AliExpress voor makers" I saw a powerbank pass by with quite a number of good…
To connect the external keypad to your Icom radio you'll need to make a connector cable. For this we use…
The 8 pin screw connector finally arrived, so last weekend I took some time to assemble the 4 remaining PCB's…