The 8 pin screw connector finally arrived, so last weekend I took some time to assemble the 4 remaining PCB’s I had left of this V1.00 board.
On Sunday, I tested these PCBs during the Coupe Du REF CW contest. And although I made the external keyboard to control the keyer, I mainly used the up and down buttons to surf the band. So I only had to make a small movement with my wrist from my CW paddle to the keyboard, and not a big swing to the VFO of the IC-7300, which is placed a bit further on my desk.
Porting the Autmatic Magnetic Loop Tuner project to the Teensy 4.0 platform Building a Nano…
In de kringloopwinkel een spiksplinternieuwe Opinel 9 vinden, met het originele antidiefstal stripje er nog…
Now that the two toroids are prepared, and everything is already mounted into the enclosure…
The project descibes to use a FT37-43 toroid. This toroid is manufactured by Amidon. I'm…
Green wire, 5 turns Start with the green wire. In the parts list it is…
The original design features the Radio-Shack P/N 270-233 box, wich measures 5" 1/16 x 2"…