It all started after browsing through Strobist.com, and viewing David Hobby’s Strobist DVD’s. I wanted to try to photograph some bouncing water droplets.
Like with most things, the preparation and the cleaning up afterwards take more time than the actual shooting. I used a big black oven plate as a water basin. A big piece of cardboard had to serve as background. I preferred to have a white background, but I didn’t have any, but if you set your strobe’s power high enough, everything will become white.
I tight up a little zip-lock bag on the ceiling’s light and punched a hole in it. The hole however seemed to be to big. I got to many droplets at the same time. Also the bag was turning around, which made it hard to keep the focus right.
I placed my Canon 430EX II camera left on a piece of foam, pointed towards the background and triggered with a cheapo eBay wireless flash trigger.
Of all 360 pictures I managed to make in less then 10 minutes, the following were the nicest.
The setup:
Two days later I found out a way to make a nice and easy Droplet generator, using only a Schell tap and an empty milk container.
With this own made droplet generator it’s a lot easier to make all the droplets fall on the exact same spot, and thus enable you to always focus right.
Check out the result:
Porting the Autmatic Magnetic Loop Tuner project to the Teensy 4.0 platform Building a Nano…
In de kringloopwinkel een spiksplinternieuwe Opinel 9 vinden, met het originele antidiefstal stripje er nog…
Now that the two toroids are prepared, and everything is already mounted into the enclosure…
The project descibes to use a FT37-43 toroid. This toroid is manufactured by Amidon. I'm…
Green wire, 5 turns Start with the green wire. In the parts list it is…
The original design features the Radio-Shack P/N 270-233 box, wich measures 5" 1/16 x 2"…