I was trying to fit the automatic magnetic loop tuner into a smaller enclosure. It was only a partial success.
There is plenty of space for the display and buttons on the front, but I have to choose between the SWR bridge or the rotary encoder. This, however, is not an option. They both need to be present in the automatic magnetic loop tuner. So the only possibility I see for the moment is to look for a smaller box to accommodate the SWR bridge. If I can’t find a smaller box for the SWR bridge, I’ll probably have to stick with the larger Hammond enclosures.
I also used a green display instead of the blue ones I usually use. What’s your favorite colour?
Porting the Autmatic Magnetic Loop Tuner project to the Teensy 4.0 platform Building a Nano…
In de kringloopwinkel een spiksplinternieuwe Opinel 9 vinden, met het originele antidiefstal stripje er nog…
Now that the two toroids are prepared, and everything is already mounted into the enclosure…
The project descibes to use a FT37-43 toroid. This toroid is manufactured by Amidon. I'm…
Green wire, 5 turns Start with the green wire. In the parts list it is…
The original design features the Radio-Shack P/N 270-233 box, wich measures 5" 1/16 x 2"…